Nelson Epoxy Floor Coating Paints

Nelson Epoxy Floor & Concrete Coating is tough, adherent and abrasion resistant coating. Cured finishes resist. Splashes and spillage of most the aliphatic and aromatic solvent. Cured poting will not produce stain if spillage of coloured materials is

Design Usage

Nelson Epoxy Floor & Concrete Coating may be specified for the floors & walls in chemical Factories, Hospitals & Laboratories printing/dying rooms, where cement/plaster is liable to attack by high humidity, spillage or fumes of solvents & chemicals.

  • Physical Data
    Recommended Application Data & Theoretical Coverage(m2/ltr.) by airless Gun
    Wet (µm) Dry (µm) m2/ltr.
    - - 8 - 10
    Type Two Pack - Cold Cure
    Flash Point 30C
    Packing 4 Liters (Base = 3 Liter, Hardener = 1 Liter)
    Ratio 3:1 (by Volume)
  • Application Method
    Brush / Roller May be used for difficult shapes or touch-up. However, additional coats may be required to achieve recommended film thickness.
  • Drying / Curing Time
    Touch Dry
    Hard Dry
    Pot Life (Hrs.)
    35oC 1-2 6 7 8 2

    Full cured = 7 Days

  • Additional Information
    Thinner (Brush) Nelson Epoxy Thinner
    Cleaner Nelson Epoxy Thinner
    Storage Instruction Store in a cool shaded dry area
    Shelf Life As long as the container is kept firmly sealed & stored under normal conditions, the material can be
  • Surface Preparation

    not available

  • Product Use Restriction

    not available