Air Drying Red Lead Primer Paints

A one pack primer designed for normal priming of structural steel work where standard of surface preparation is limited but adequate time available for through drying

Design Usage

  • Primer suitable for over coating with single pack Protection finishes
  • Anti-corrosive build coat for particularly aggressive environments
  • Ideal for steel protection where surface preparation is limited
  • Relative humidity should not exceed 85% and substrate temperature should be more than 3oC above Dew Point
  • Physical Data
    Recommended Application Data & Theoretical Coverage(m2/ltr.) by airless Gun
    Wet (µm) Dry (µm) m2/ltr.
    63 50 15.8
    Type Single Pack - Air Dr
    Volume Solids 80 ± 5%
    Flash Point 32C
    Finish Semi Gloss
    Color 63
    Packing 4 Liters
    Ratio Not Applicable
  • Application Method
    Brush / Roller This is recommended method of application. Care should be taken to ensure an even application to avoid film defects
  • Drying / Curing Time
    Surface
    Temperature
    Touch Dry
    (Hrs.)
    Hard Dry
    (Hrs.)
    Minimum
    (Hrs.)
    Maximum
    (Days.)
    Pot Life (Hrs.)
    25C 6 26 28 15 Not Applicable
    30C 4 24 26 10 Not Applicable
    35C 2 22 24 7 Not Applicable

    Full Cure = 07 Days

  • Additional Information
    Thinner (Brush) Nelson Ind. Thinner
    Cleaner Nelson Ind. Thinner
    Storage Instruction Store in a cool shaded dry area
    Shelf Life As long as the container is kept firmly sealed & stored under normal conditions, the material can be
  • Surface Preparation

    The life-span and performance of coating is directly related to the degree of surface preparation

    IRON / STEEL:
    The

  • Product Use Restriction

    Do not over-coa t with two pack products
    This product will not be dry below 5C